SW2 L4-1.9L DOHC VIN 7 (1997)
1.
With ignition lock cylinder module in ACC position, slide ignition lock cylinder assembly into ignition lock cylinder module.
IMPORTANT:
Make sure square locking button locks into opening in ignition lock cylinder module.
2.
Verify that the ignition lock cylinder operates correctly.
3.
Install upper steering column shroud.
4.
Install steering column lower trim cover bolts.
Torque: 3 N.m (26 in-lbs)
5.
Affix Campaign Completion Label to radiator core support.
6. Enter new key code in the "Customer Service Order" (CSO).
Campaign Completion Label
