SW2 L4-1.9L DOHC VIN 7 (1997)
NOTICE:
Ignition lock cylinder pin is under pressure, be careful not to lose ignition lock cylinder pin when removing from ignition lock cylinder.
3.
Insert ignition key into ignition lock cylinder, and depress ignition lock cylinder pin at rear of ignition lock cylinder with a thin-bladed
screwdriver.
4.
Rotate ignition lock cylinder and remove ignition lock cylinder pin and ignition lock pin spring.
5.
Remove ignition lock cylinder from ignition lock cylinder housing.
6.
To code ignition lock cylinder, refer to "Lock Cylinder Coding Procedures - All Lock Cylinders" included in this bulletin.
Lock Cylinder Coding Procedures - All Lock Cylinders
1.
Remove key from lock cylinder.
