SW2 L4-1.9L DOHC VIN 7 (1997)
a.
Look up the old key code.
b.
Re-code the lock cylinders with the replacement key code listed in the "Replacement Key Codes" list.
IMPORTANT:
Key codes in the 1991-1997 Saturn Key Code Manual are not in numerical order.
^
Ignition lock cylinder reads key cut position 2 through 10.
^
Front side door, liftgate and rear compartment lock cylinders reads key cut positions 5 through 10.
(Illustration shows a number 4 lock cylinder tumbler.)
5.
Refer to 1991 - 1997 Saturn Key Code Manual for tumbler numbers of new key code referenced in "Replacement Key Codes" list.
6.
If necessary, install lock cylinder tumbler springs and lock cylinder sidebar into lock cylinder. (Lock cylinder tumbler springs and lock cylinder
sidebar may have fallen out of lock cylinder during step 2 of this procedure.)
7.
Install lock cylinder tumblers into lock cylinder, by applying downward pressure until lock cylinder tumblers lock into place.
8.
Cut two new keys based on the new key code of the lock cylinders.
a.
Look up code in Key Code Book.
