SW2 L4-1.9L DOHC VIN 7 (1997)
Starter Relay: Service and Repair
Starter Relay Removal
REMOVAL
1. Remove I/P bolt caps by carefully prying with a small flat head screwdriver.
2. Remove I/P upper trim panel screws.
Starter Relay Removal
3. Lift I/P upper trim panel at clip locations on rear edge to disengage clips.
4. Pull I/P upper trim panel rearward out of clips at bottom of windshield.
IMPORTANT: Be careful, when removing or replacing I/P upper trim panel, not to damage VIN plate.
5. Remove I/P upper trim panel.
IMPORTANT: Be careful, when removing upper trim panel, not to damage the upper trim panel seal (SL/SW only).
Starter Relay Removal