SW2 L4-1.9L DOHC VIN 7 (1997)
Rear Knuckle: Service and Repair
Disc Brakes
Removal
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST. TO HELP AVOID
PERSONAL INJURY, PROVIDE ADDITIONAL SUPPORT TO THE OPPOSITE END OF THE VEHICLE THAT COMPONENTS WILL
BE REMOVED FROM.
1. Raise vehicle on hoist.
2. Remove road wheel corresponding to the knuckle being replaced.
3. Remove electrical connector from ABS wheel speed sensor.
4. Remove two caliper to knuckle mounting bolts.
5. Suspend the caliper assembly using wire by the strut spring clear of the knuckle.