SW2 L4-1.9L DOHC VIN 7 (1997)
Valve Body Gasket
IMPORTANT: Be sure all parts are clean and free of lint and dirt. Valve body should be assembled in a clean area.
1. Install valves, new gaskets, and check balls according to the figures.
2. Install two halves of valve body and install the one bolt holding the two halves together.
IMPORTANT: The dowel bolts must be placed in the holes shown to align the upper valve body to the lower valve body.
3. Lube actuator O-rings.
4. Install actuators using a twisting motion.
5. Install detent arm and bolt.
-
Torque: 11 N.m (97 inch lbs).
