SW2 L4-1.9L DOHC VIN 7 (1997)
5. With manual windows:
Install manual window regulator handle clip on handle. Install door handle onto vehicle with handle pointed in a forward and slightly up position
with window closed.
6. If equipped with power locks, connect harness to power door lock switch.
7. Position door handle assembly in trim panel. Tip handle outward at top. Using a thin hook style tool, lift latch and lock rods into trim panel and
slide rearward to engage tabs. Install screw in handle.
8. Install mirror trim panel.
Window Regulator/Motor
FRONT DOOR WINDOW REGULATOR/MOTOR (Sedan / Wagon Shown, Coupe Similar)
REMOVAL
IMPORTANT: Do not damage insulator panel when removing regulator.