VUE L4-2.2L VIN D (2002)
PROM - Programmable Read Only Memory: All Technical Service Bulletins
A/T - Identification/TCM Reprogramming Requirements
File in Section: 07 - Transmission/Transaxle
Bulletin No.: 03-07-30-055
Issue Date: November, 2003
Subject:
Service Information Regarding 2002 and 2003 Model Year VT25E Transaxle
Replacement with 2004 Model Year VT25E Transaxle
Models Affected:
2002-2003 VUE Vehicles
2003 ION Vehicles
with VT25E (Vti) Transaxle (RPOs M75, M16)
Attention: Technician
Purpose:
The purpose of this bulletin is to authorize the use of a 2004 model year VT25E transaxle assembly to replace a 2002 and 2003 model year V125E
transaxle assembly in a 2002-2003 model year Saturn VUE and a 2003 model year Saturn ION. This authorization is only valid when 2002 and 2003
model year VT25E replacement transaxles are no longer available from Saturn Service Pants. The information contained in this bulletin explains how to
properly identity the transaxle model year and also provides the necessary reprogramming requirements that must be performed when installing a 2004
model year transaxle assembly into a 2002-2003 model year Saturn VUE and 2003 model year Saturn ION.
Transaxle Model Year Identification:
There are two identification points on the VT25E transaxle assembly. The metal identification plate (1) is located on the transaxle case assembly. The
transaxle identification label (2) is located on the control valve body cover. Refer to the illustration and accompanying legend.
Important:
If the control valve body cover has previously been replaced, there will not be a transaxle identification label (2) located on it. In this case, use the
metal identification plate (1) as an accurate means of identification.
