VUE 2WD L4-2.2L VIN D (2005)
1. Position the front and rear sections of the luggage carrier to the roof.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the luggage carrier top screws.
Tighten the screws to 7 N.m (62 lb in).
3. Open the lift gate and support at a 45 degree angle, and install the rear mounting screws to the luggage carrier.
Tighten the screws to 2.3 N.m (20 lb in).
4. Remove the roof rear panel applique. Refer to Panel Applique Replacement - Roof Rear () in Exterior Trim.
5. Remove the roof front panel applique. Refer to Panel Applique Replacement - Roof Front () in Exterior Trim.
