VUE 2WD V6-3.5L VIN 4 (2004)
-
Tighten the 8 mm locknut to 12 Nm (8.7 ft. lbs.).
7. Connect the shift cable to the transmission control lever and cable bracket.
8. Connect the park/neutral position switch harness connectors.
9. Install the range selective lever bolt and cover.
-
Tighten the bolt to 10 Nm (89 inch lbs.).
10. Install the left splash shield.
11. Install the tire and wheel.
12. Lower the vehicle.
13. Verity the park/neutral position switch adjustment by starting the vehicle in all ranges. If the transmission starts in any ranger other than park or
neutral, readjust the park/neutral position switch.
