VUE AWD L4-2.2L VIN D (2005)
Rear Door Window Regulator: Service and Repair
Rear Door Window Regulator - Power
Window Regulator Replacement - Rear Door (Power)
Removal Procedure
1. Remove the rear door window. Refer to Window Replacement - Rear Door (See: Rear Door Window Glass/Service and Repair) .
2. Disconnect the window regulator electrical connector through the inside handle hole in the door.
Important: Do not damage sound insulator when removing the regulator.
3. Remove the net-hole regulator bolts from the regulator (1, 4).
4. Partially remove the keyhole slot bolts (2, 3, 5).
5. Remove the rear door regulator out through the lower access hole in the door structure.
Installation Procedure