VUE AWD L4-2.2L VIN D (2005)
1. Position the right console trim panel.
2. Install the push-in fastener.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the screws to the right console trim panel.
Tighten the screws to 2.5 N.m (22 lb in).
4. Install the I/P compartment. Refer to Compartment Replacement - Instrument Panel (I/P) (See: Glove Compartment/Service and Repair/Removal
and Replacement/Compartment Replacement - Instrument Panel (I/P)) .
5. Position the center trim plate to the front console.
6. Push until the trim clips engage.
7. Install the center trim bezel to the console. Refer to Trim Bezel Replacement - Center (See: Dashboard / Instrument Panel/Service and
Repair/Trim Bezel Replacement - Center) .
