VUE AWD L4-2.2L VIN D (2005)
Trim Panel: Service and Repair
Garnish Molding Replacement - Center Pillar Lower
Garnish Molding Replacement - Center Pillar Lower
Removal Procedure
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 2 and to SIR Disabling and Enabling Zone 6 in SIR.
2. Move the front seat to the forward position.
3. Remove the rearmost clip from the hinge pillar garnish molding.
4. Remove the rear carpet retainer. Refer to Carpet Retainer Replacement - Rear (See: Carpet/Service and Repair/Removal and Replacement/Carpet
Retainer Replacement - Rear) .
5. Remove the center pillar upper molding. Refer to Garnish Molding Replacement - Center Pillar Upper (See: Garnish Molding Replacement -
Center Pillar Upper) .
6. Starting at the top of the lower garnish molding, pull at the clip locations to disengage the clips.
7. Remove the molding.