VUE AWD L4-2.2L VIN D (2005)
6. Install the finish molding to the rear upper trim.
7. Install the rear upper trim molding. Refer to Molding Replacement - Rear Window Upper (See: Molding Replacement - Rear Window Upper) .
8. Install the carpet retainer. Refer to Carpet Retainer Replacement - Rear (See: Carpet/Service and Repair/Removal and Replacement/Carpet
Retainer Replacement - Rear) .
Notice: Refer to Fastener Notice in Cautions and Notices.
9. Install the load floor storage bins.
Tighten the fasteners to 2.5 N.m (22 lb in).
10. Install the cargo hooks.
Tighten the fasteners to 25 N.m (18 lb ft).
Windshield Upper Garnish Molding Replacement
Windshield Upper Garnish Molding Replacement
Removal Procedure
Notice: Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the head curtain inflator
module is damaged in any way, it must be replaced.
Notice: If a vehicle is equipped with a head curtain inflator module ensure that the inflator module and tether are undamaged. If tether or curtain
airbag are damaged in any way, they must be replaced.
1. Using a small flat-bladed tool, remove the fastener cover from the windshield upper garnish molding, by prying at the bottom edge.
2. Remove the fastener from the garnish molding
3. Starting at the top, gently pull on the garnish molding to disengage the clips.
