VUE AWD L4-2.2L VIN D (2005)
The vehicle service parts identification label is located on the driver side rear door. The label is used to help identify the vehicle original parts and
options.
Basecoat/Clearcoat Paint Systems
Basecoat/Clearcoat Paint Systems
Caution: Exposure to isocyanates during paint preparation and application processes can cause severe breathing problems. Read and follow all of the
instructions from the manufacturers of painting materials, equipment, and protective gear.
All paint finish repairs of rigid exterior surfaces must meet GM standards. Refer to the latest revision of the GM Approved Refinish Materials book GM
P/N GM4901M-D to identify the paint systems you may use that have been engineered to meet GM standards. The GM Approved Refinish Materials
book supplies all approved products, including volatile organic compound (VOC) compliant regulations recommended by the individual manufacturer,
and detailed procedures for materials used in their paint system.
Paint Identification
Paint Identification
Caution: Exposure to isocyanates during paint preparation and application processes can cause severe breathing problems. Read and follow all of the
instructions from the manufacturers of painting materials, equipment, and protective gear.
Important: Always refer to the GM Approved Refinish Materials book GM P/N 4901M-D. This book identifies the paint systems you may use.
Use the service parts identification label to identify the type of paint technology, paint codes, trim level, and any special order paint colors on the vehicle.
Refer to Label - Vehicle Certification, Tire Place Card, Anti-Theft and Service Parts ID in General Information.
