VUE AWD L4-2.2L VIN D (2005)
2. Install the lumbar knob.
3. Install the lumbar cable in the actuator:
1. Pull back on the lumbar cable sleeve.
2. Install the barrel end of the cable from the lumbar actuator.
3. Adjust the knob to ensure that the cable is properly installed.
4. Install the front seat. Refer to Seat Replacement - Front Bucket (See: Seats/Service and Repair/Seat Replacement - Front Bucket) .
Seat Switch Bezel Replacement
Seat Switch Bezel Replacement
Removal Procedure
1. Move the seat to the most forward position.