VUE AWD L4-2.2L VIN D (2005)
Notice: Refer to Fastener Notice in Cautions and Notices.
*
Install the lower fixed glass post bolt.
Tighten the bolt to 10 N.m (89 lb in).
2. Install the rear door sound insulator. Refer to Sound Insulator Replacement - Rear Door (See: Doors, Hood and Trunk/Doors/Rear Door/Rear
Door Panel/Service and Repair/Door Insulator) .
3. Install the rear door outer panel. Refer to Outer Door Panel Replacement Rear - Bolt On () .
4. Install the rear door window weatherstrip run channel assembly. Refer to Window Weatherstrip Run Channel Assembly Replacement - Rear (See:
Window Weatherstrip Run Channel Assembly Replacement - Rear) .
5. Install the rear door applique. Refer to Door Frame Applique Replacement - Rear () .
6. Install the rear door window. Refer to Window Replacement - Rear Door (See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door Window
Glass/Service and Repair) .
Window Weatherstrip Run Channel Assembly Replacement - Rear
Window Weatherstrip Run Channel Assembly Replacement - Rear
Removal Procedure
1. Lower the rear door window.
2. Remove the rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door
Panel/Service and Repair
3. Starting at one end, carefully pull the window weatherstrip run channel assembly from the door frame.
Installation Procedure
1. Align the notch in the window weatherstrip seal to the fixed glass post and press the weatherstrip onto the window flange.