VUE AWD L4-2.2L VIN D (2005)
5. Remove the brake caliper bracket bolts (2).
6. Remove the brake caliper bracket (1) from the knuckle.
Installation Procedure
1. Install the brake caliper bracket (1) to the knuckle.
2. Important: If reusing the caliper bracket bolts, the threads of the caliper bracket bolts and the threads of the knuckle mounting holes must be
thoroughly cleaned and free of debris prior to the application of threadlocker.
Prepare the bolts and the threaded holes for assembly:
1. Thoroughly clean the residue from the bolt threads by using denatured alcohol or equivalent and allow to dry.
2. Thoroughly clean the residue from the threaded holes by using denatured alcohol or equivalent and allow to dry.
3. Apply threadlocker Saturn P/N 21005994, or equivalent to two-thirds of the threaded length of the lower caliper bracket bolts.
4. Allow the threadlocker to cure approximately 10 minutes before installation.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the 2 brake caliper bracket bolts (2).
Tighten the front brake caliper bracket bolts to 185 Nm (136 ft. lbs.).
4. Install the brake pad retainers (1) to the brake caliper bracket (3).
5. Install the brake pads (2) to the brake caliper bracket (3).
6. Install the brake caliper (1) to the front brake caliper bracket (2).
