VUE AWD L4-2.2L VIN D (2005)
11. Insert the cable through the opening in the vehicle underbody.
12. Install the park brake cable retaining bracket to the rear suspension lower trailing arm.
Notice: Refer to Fastener Notice in Service Precautions.
13. Install the bolt and nut to the park brake cable retainer and lower trailing arm.
^
Tighten the bolt and nut to 12 Nm (106 inch lbs.).
14. Install and secure park brake cable pass-thru grommet to the opening in the vehicle underbody.
15. Install the park brake cable to the underbody retainer.
16. Install the bolt to the park brake cable retainer and the vehicle underbody.
^
Tighten the bolt to 25 Nm (18 ft. lbs.)
17. Lower the vehicle.
18. Secure the cable fitting to the park brake lever bracket. Attempt to pull the park brake cable free of the lever bracket, to ensure that the retaining
tabs on the fitting are properly secured.
19. Install the cable end (2) to the cable equalizer.
