VUE AWD L4-2.2L VIN D (2005)
1. Install the cruise brake switch retainer into the upper hole of the brake pedal assembly with the retainer arrow pointing in the 3 o'clock position.
IMPORTANT: Inspect the retainer to ensure that the locking tabs locked into position and the retainer is in place.
2. Install the cruise brake switch.
-
Position the switch into the retainer with the electrical connector index notch pointing to the 1 o'clock position.
-
Slide the switch in the retainer until the plunger is fully depressed into the barrel.
-
Rotate the switch clockwise until the travel stop has been reached, approximately 60 degrees.
-
Inspect the cruise brake switch to ensure the switch is properly locked into the switch retainer with the cruise brake switch electrical connector
index notch pointing to the 3 o'clock position.
IMPORTANT: Do not depress the brake pedal assembly during the cruise brake switch installation. Depressing the brake pedal during the cruise
brake switch installation will cause a brake drag condition.