VUE AWD L4-2.2L VIN D (2005)
7. Apply thread sealant (Saturn P/N 21485277) Loctite(tm) 242 threadlocker, or equivalent, to sensor threads.
8. Install the ECT sensor.
Tighten the ECT sensor to 18 Nm (13 ft. lbs.).
9. Connect the ECT sensor harness connector. Push in the connector until a click is heard, then pull back to confirm a positive engagement.
10. Install the battery.
11. Connect the negative battery cable.
Tighten the battery terminal bolt to 17 Nm (13 ft. lbs.).
12. Fill the coolant.
