VUE AWD L4-2.2L VIN D (2005)
Install a new O-seal on the water pipe.
4. Position the water pipe into the water pump assembly.
5. Seat the water feed O-seal by pushing and twisting toward the water pump. Take care not to tear or damage the O-ring.
6. Install the thermostat housing cover to the water pipe. The water feed pipe has a locating tab to assure proper alignment.
7. Install a new thermostat housing cover seal into the recess groove.
8. Position the thermostat housing cover into position.
9. Notice: Refer to Fastener Notice in Service Precautions.
Install the thermostat housing cover bolts.
Tighten the thermostat housing cover-to-thermostat housing bolts to 10 Nm (89 inch lbs.).
10. Lower the vehicle.
11. Install the exhaust manifold heat shield.
12. Install the exhaust manifold heat shield bolts.
Tighten the exhaust manifold heat shield bolts to 23 Nm (17 ft. lbs.).