VUE AWD L4-2.2L VIN D (2005)
Caution: Whenever fuel line fittings are loosened or disconnected, wrap a shop cloth around the fitting to collect fuel. Place the cloth in an approved
container.
Notice: An open-end wrench must be used to support the fuel line to rail connection during loosening/tightening to avoid damaging the fuel rail
assembly.
16. While supporting the fuel rail assembly with an open end wrench, loosen the transfer line fitting at the fuel rail.
17. Position the fuel line away from the cam cover assembly.
18. Remove the cam cover assembly bolts.
19. Remove the cam cover assembly.
Installation Procedure
1. Visually inspect the camshaft cover gasket for signs of leakage. The camshaft cover gasket is reusable if not damaged.
2. Assemble the camshaft cover and gasket. Use care to make sure the gasket is located in the retaining groove on the camshaft cover.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the cover on the cylinder head and hand-tighten the bolts.
