VUE AWD L4-2.2L VIN D (2005)
7. Install the ECM assembly and bolts.
8. Attach the electrical harness to the bottom of the intake manifold.
9. Connect the electrical connector at the ECM, injector harness and MAP sensor.
10. Connect the purge hose.
11. Remove the shop towel from the throttle body opening.
12. Install the new throttle body gasket.
13. Install the throttle body assembly and bolts.
^
Tighten the throttle body-to-intake manifold bolts L61 to 10 Nm (89 inch lbs.).