VUE AWD L4-2.2L VIN D (2005)
17. While supporting the fuel rail assembly with an open end wrench, loosen the transfer line fitting at the fuel rail.
18. Position the fuel line away from the cam cover assembly.
19. Remove the cam cover assembly bolts.
20. Remove the cam cover assembly.
Important: To rotate the camshaft, use a 24 mm open-end wrench on the camshaft flats. Camshaft should be rotated in a clockwise direction only,
facing camshaft sprockets from the passenger side of the vehicle.
21. Locate the No. 1 piston to approximately 60° before top dead center (diamond shaped hole on intake camshaft sprocket at 12 o'clock position).
Remove the spark plugs. This will ease the rotation effort.
