VUE AWD L4-2.2L VIN D (2005)
Timing Component Alignment Marks: Locations
Installation
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the timing chain oiler nozzle and the bolt, then tighten.
^
Tighten the timing chain oil nozzle bolt to 10 Nm (89 inch lbs.).
2. Install the timing chain drive sprocket to the crankshaft.
Notice: Set crankshaft to 60° before top-dead center or after TDC to prevent valve to piston contact.
3. Using the dampener, rotate the crank so that the mark on the timing chain drive sprocket is at 5 o'clock position.
4. Set the crankshaft to 60° before the top dead center.