VUE AWD L4-2.2L VIN D (2005)
12. Install the adjustable timing chain guide through the opening at the top of the cylinder head and install the chain guide bolt.
^
Tighten the timing chain guide (adjustable) bolt to 10 Nm (89 inch lbs.).
13. Install the exhaust camshaft sprocket loosely on the exhaust camshaft with the timing mark on the sprocket aligned with the silver link.
14. Install new camshaft sprocket bolt loosely.
15. Align the camshaft sprocket with the chain in proper position to the camshaft. Rotate the exhaust clockwise using a 24 mm wrench on the flats on
the camshaft until the camshaft aligns with the sprocket.
16. Verify that all the colored links are aligned with the appropriate intake (1), crankshaft sprocket (2), and (3) exhaust marks.
17. Verify the crankshaft sprocket timing mark is at 5 o'clock.
18. If marks are not correct, you must repeat the timing procedure.
