VUE AWD L4-2.2L VIN D (2005)
Dimmer Switch: Service and Repair
INSTRUMENT PANEL (I/P) DIMMER SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the instrument panel (I/P) trim panel bezel.
2. Remove the switch assembly fasteners and remove the switch assembly.
INSTALLATION PROCEDURE
1. Install the switch assembly on to the bezel and install the fasteners.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the fasteners to 2.5 N.m (22 lb in).
2. Install the I/P trim panel bezel.
