VUE AWD L4-2.2L VIN D (2005)
12. Remove the connector position assurance (CPA) from the roof rail module - left connector.
13. Disconnect the roof rail module - left connector from the vehicle harness connector.
14. Remove the lower center pillar trim.
15. Remove the CPA from the seat belt pretensioner - LF connector.
16. Disconnect the seat belt pretensioner - LF connector.
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. To enable the roof rail module - left, perform steps 3-8. To enable both the roof rail module - left and the seat belt pretensioner - LF, continue to
step 3.
