VUE AWD L4-2.2L VIN D (2005)
Coolant Line/Hose: Service and Repair
Water Crossover Replacement
Water Crossover Replacement
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the battery.
3. Drain the engine coolant.
4. Disconnect the engine coolant temperature (ECT) sensor electrical connector.
5. Remove the ECT sensor.
6. Remove the radiator inlet and outlet hoses from the crossover pipe.
7. Disconnect the wiring harness ground terminal from the crossover pipe.
8. Remove the thermostat housing and thermostat from the crossover pipe.