VUE AWD L4-2.2L VIN D (2005)
10. Remove the spark plugs using a spark plug socket.
IMPORTANT: To avoid getting water and debris into the spark plug holes, used compressed air and a shop rag to blow out each spark plug hole
before plus are removed.
INSTALLATION PROCEDURE
1. Gap the spark plugs.
NOTE: Do not coat spark plug threads with anti-seize compound. If anti-seize compound is used and spark plugs are over-torqued, damage to the
cylinder head threads may result.
Spark Plug Gap: 1.14 mm
2. Install the spark plugs.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the spark plugs to 20 N.m (15 lb ft).
