VUE AWD L4-2.2L VIN D (2005)
Transmission Position Switch/Sensor: Service and Repair
4T40-E/4T45-E
Park/Neutral Position (PNP) Switch Replacement
^
Tools Required
-
J 41545 Park Neutral Position Switch Tool
Removal Procedure
1. Disconnect the shift control cable (3) from the range select lever (4).
2. Release the shift control cable retaining clip (2) and remove the cable from the shift control cable bracket (1).
3. Remove the transaxle range select lever nut (2).
4. Remove the transaxle range select lever (3) from the transaxle manual shaft (1).
