VUE AWD L4-2.2L VIN D (2005)
7. Install the shift control cable and retaining clip (2) to the shift control cable bracket (1).
8. Install the shift control cable (3) to the range select lever (4).
9. Verify proper operation of the shift control cable and if necessary adjust the cable.
1. Place the shift lever in N (Neutral). Rotate the selector shaft clockwise from P (Park) through R (Reverse) into N (Neutral).
2. With the shift control assembly in N (Neutral) lift the cable connector locking clip up.
3. Push the clip on the cable connector until fully seated and flush with cable body.