VUE AWD L4-2.2L VIN D (2005)
1. Transfer components to the new fuel rail if the rail is being replaced.
2. Install the new upper and lower O-ring seals (4, 7) to injectors (5).
3. Install the injectors (5) to the fuel rail assembly.
4. Install the isolators (6) with new seals to injectors.
5. Install the injector retaining clip (3).
6. Install the fuel rail to the cylinder head.
IMPORTANT: Lubricate the O-rings at injector isolators prior to installing injectors into the cylinder head.
7. Install the fuel rail bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the fuel rail-to-cylinder head L61 to 10 N.m (89 lb in).
