VUE AWD L4-2.2L VIN D (2005)
Throttle Body: Description and Operation
THROTTLE BODY ASSEMBLY
The throttle assembly contains the following components:
-
The throttle blade
-
The throttle actuator motor
-
The throttle position (TP) sensor 1 and 2
The throttle body functions similar to a conventional throttle body with the following exceptions:
-
An electric motor opens and closes the throttle valve.
-
The throttle blade is spring loaded in both directions and the default position is slightly open.
-
There are 2 individual TP sensors within the throttle body assembly.
The TP sensors are used to determine the throttle plate angle. The TP sensors provide the ECM with a signal voltage proportional to throttle plate
movement. The TP sensor 1 signal voltage at closed throttle is near the 5-volt reference and decreases as the throttle plate is opened. The TP sensor 2
signal voltage at closed throttle is near the low reference and increases as the throttle plate is opened.
