VUE AWD L4-2.2L VIN D (2005)
Fuse Types
The fuse is the most common method of an automotive wiring circuit protection. Whenever there is an excessive amount of current flowing through a
circuit the fusible element will melt and create an open or incomplete circuit. Fuses are an one time protection device and must be replaced each time the
circuit is overloaded. To determine if a fuse is open, remove the suspected fuse and examine the element in the fuse for an open (2). If not broken (1),
also check for continuity using a DMM or a continuity tester. If the element is open or continuity is suspect, replace the fuse with one of equal current
rating.
Circuit Protection - Fusible Links
CIRCUIT PROTECTION - FUSIBLE LINKS
Fusible link is wire designed to melt and break continuity when excessive current is applied. It is often located between or near the battery and starter or
electrical center. Use a continuity tester or a DMM at each end of the wire containing the fusible link in order to determine if it is broken. If broken, it
must be replaced with fusible link of the same gage size.
Repairing a Fusible Link
Fusible link wire assemblies are available through Saturn Service Parts. Repair the fusible link by replacing the entire fusible link assembly from
generator to the starter.
GMLAN Wiring Repairs
GMLAN WIRING REPAIRS
TOOLS REQUIRED
J 44020 Terminal Repair Kit
The GM Local Area Network (GMLAN) System requires special wiring repair procedures due to the sensitive nature of the circuitry. Follow the
specific procedures and instructions when working on GMLAN connectors and terminals.
The tool kit J 44020 contains the following items in order to repair the GMLAN wiring:
-
Duraseal splice sleeves
-
A wire stripping tool
-
A special crimping tool
-
A heat torch
The duraseal sealed splices have the following 2 critical features:
