VUE AWD L4-2.2L VIN D (2005)
3. Install the EI module and attachment screws (if removed).
IMPORTANT: Ensure the interconnect is line up and the interconnect seal is in place before installing the attachment screws.
Tighten the module screws to 1.5 N.m (13 lb in).
4. Connect the EI module harness connector. Push in the connector until a slick is heard, then pull back to confirm a positive engagement.
5. Position the outlet resonator/duct assembly into position.
6. Connect the PCV fresh air bent hose assembly.
7. Tighten the clamp at the throttle body assembly.
8. Position the outlet resonator/duct assembly up with the support bracket and install the push-pin.
9. Tighten the clamp at the air cleaner assembly.
10. Connect the intake air temperature (IAT) sensor connector.
