VUE AWD L4-2.2L VIN D (2005)
IMPORTANT: With the AIR BAG fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is
normal operation, and does not indicate an SIR system malfunction.
6. To disable the roof rail module - right, perform steps 7-13. To disable both the roof rail module - right and the seat belt pretensioner - RF, continue
to step 7.
7. Remove the upper rear window molding.
8. Remove both the left and right rear corner garnish moldings.
9. Remove the rear headliner push-in retainers.
10. Remove the rear coat hooks.
11. Gently pull down the right rear corner of the headliner to access the roof rail module - right connector.
12. Remove the connector position assurance (CPA) from the roof rail module - right connector.
13. Disconnect the roof rail module - right connector from the vehicle harness connector.
14. Remove the lower center pillar trim.
15. Remove the CPA from the seat belt pretensioner - RF connector.
16. Disconnect the seat belt pretensioner - RF connector.
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. To enable the roof rail module - right, perform steps 3-8. To enable both the roof rail module - right and the seat belt pretensioner - RF, continue
to step 3.
