saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

ABOUT US
Deployment Outside Vehicle - Steering Wheel Module, I/P Module, and Roof Rail Module|Page 9803 > < Deployment Outside Vehicle - Steering Wheel Module, I/P Module, and Roof Rail Module|Page 9801

VUE AWD L4-2.2L VIN D (2005)

Page 4
background image

21. Route the deployment harness out of the driver side of the vehicle.

22. Disconnect the yellow left roof rail harness connector from the vehicle harness connector.

23. Cut the harness connector out of the vehicle, leaving at least 16 cm (6 in) of wire at the connector.
24. Strip 13 mm (0.5 in) of insulation from each of the connector wire leads.

25. Cut two 6.1 m (20 ft) deployment wires from a 0.8 mm (18 gage) or thicker multi-strand wire. These wires will be used to fabricate the roof rail 

Deployment Outside Vehicle - Steering Wheel Module, I/P Module, and Roof Rail Module|Page 9803 > < Deployment Outside Vehicle - Steering Wheel Module, I/P Module, and Roof Rail Module|Page 9801