saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Deployment Outside Vehicle - Steering Wheel Module, I/P Module, and Roof Rail Module|Page 9813 > < Deployment Outside Vehicle - Steering Wheel Module, I/P Module, and Roof Rail Module|Page 9811
Page 2
background image

1. Connect the horn switch connector.
2. Connect the inflatable restraint connectors.

IMPORTANT:  This vehicle is equipped with dual stage air bags, you will find 2 connectors. Match the right color connector to the right color
opening in the module.

3. Align the retaining pins on the inflatable restraint module with the steering wheel.
4. Push the inflatable restraint module to secure.
5. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems. 
6. After replacing the module, deploy the old module before disposal. If the module was replaced under warranty, fully deploy and dispose of the

module after the required retention period. Refer to Inflator Module Handling and Scrapping for proper disposal.

Deployment Outside Vehicle - Steering Wheel Module, I/P Module, and Roof Rail Module|Page 9813 > < Deployment Outside Vehicle - Steering Wheel Module, I/P Module, and Roof Rail Module|Page 9811