VUE AWD L4-2.2L VIN D (2005)
23. Put on a pair of shop gloves.
24. Disconnect the pigtail adapter from the inflator module as soon as possible.
25. Inspect the pigtail adapter and the SIR deployment harness. Replace as needed.
26. Dispose of the deployed inflator module through normal refuse channels.
27. Wash your hands with a mild soap.
Deployment Inside Vehicle - Vehicle Scrapping Procedure
DEPLOYMENT INSIDE VEHICLE - VEHICLE SCRAPPING PROCEDURE
Deploy the inflator modules inside of the vehicle when destroying the vehicle or when salvaging the vehicle for parts. This includes, but is not limited to,
the following situations:
-
The vehicle has completed all useful life.
-
Irreparable damage occurred to the vehicle in a non-deployment type accident.
-
Irreparable damage occurred to the vehicle during a theft.
-
The vehicle is being salvaged for parts to be used on a vehicle with a different VIN, as opposed to rebuilding as the same VIN.
CAUTION: Refer to SIR Inflatable Module Deployment Outside Vehicle Caution in Service Precautions.
1. Lower the driver and passenger windows.
2. Turn the ignition switch to the OFF position and remove the ignition key.
3. Check that all inflator modules which will be deployed are mounted securely.
-
Driver inflator module is secured to steering wheel.
-
Passenger inflator module is secured to instrument panel.
-
Left roof rail inflator module is secured to left roof rail.
-
Right roof rail inflator module is secured to right roof rail.
4. Put on safety glasses.
5. Remove all loose objects from the front seats.
6. Disconnect the steering wheel module yellow connector from vehicle harness yellow connector.
CAUTION: A deployed dual stage inflator module will look the same whether one or both stages were used, always assume a deployed dual
stage inflator module has an active stage 2. Improper handling or servicing can activate the inflator module and cause personal injury.
