VUE AWD L4-2.2L VIN D (2005)
Seat Belt Buckle: Service and Repair
Center Rear
SEAT BELT BUCKLE REPLACEMENT - CENTER REAR
REMOVAL PROCEDURE
1. Remove the rear seat assembly.
2. Remove the fastener from the seat belt center buckle.
3. Pull the buckle through the opening gin the seat cushion and remove the buckle.
INSTALLATION PROCEDURE
1. Route the buckle through the openings in the seat cushion.
IMPORTANT: Apply Permatex(R) 24200 on all restraint fasteners prior to installation.
2. Install the seat belt buckle with the fastener.
Tighten the fasteners to 50 N.m (37 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the rear seat assembly.