VUE AWD L4-2.2L VIN D (2005)
38. Stretch out all the deployment harness wires on the driver side of the vehicle to their full length.
39. Place a power source, 12 V minimum/2 A minimum, such as a vehicle battery, near the shorted end of harness.
40. Separate one set of wires and touch the wire ends to the power source in order to delay the seat belt pretensioner.
41. Remove the drop cloth from the vehicle.
42. Disconnect all harnesses from the vehicle.
43. Discard the harnesses.
44. Scrap the vehicle in the same manner as a non - Restraint Systems equipped vehicle.
45. If one or more of the seat belt pretensioners did not deploy, perform the following steps to remove the undeployed seat belt pretensioner from the
vehicle, refer to Seat Belt Retractor Pretensioner Replacement - Front.
46. Call the Technical Assistance Group for further assistance.
