VUE AWD L4-2.2L VIN D (2005)
4. Insert the Transaxle Range Switch Alignment J 44810 as shown and rotate the switch until the tool drops into position. The switch is aligned when
the pin on the tool drops into the hole on the transaxle range switch.
5. Notice: Refer to Fastener Notice in Service Precautions.
Tighten the transaxle range switch bolts.
^
Tighten the transaxle range switch bolts to 11 Nm (8 ft. lbs.).
6. Remove the alignment tool.
7. Install the transaxle range switch lever and nut.
^
Tighten the transaxle range switch lever nut to 16 Nm (12 ft. lbs.).
8. Connect the transaxle range switch electrical connectors.
9. Install the control cable assembly to the transaxle range switch lever and verify proper operation.
