VUE AWD L4-2.2L VIN D (2005)
1. Route the battery cable through the engine compartment and connect to the cable retainers.
2. Connect the positive battery cable to the generator.
3. Connect the positive battery cable to the starter (2).
4. Connect the positive battery cable to the UHJB (2).
Tighten the positive cable to UHJB to 17 N.m (13 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the UHJB cover (1).
6. Connect the positive battery cable to the battery.
7. Connect the negative battery cable.
