VUE AWD L4-2.2L VIN D (2005)
Control Arm Bushing: Service and Repair
Lower Control Arm Bushings Replacement (Front)
Lower Control Arm Bushings Replacement (Front)
^
Tools Required
-
J 44971 Control Arm Bushing Remover/Installer
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the front tire and wheel assembly.
3. Remove the lower control arm.
4. Place the control arm in a vise or suitable holding device.
5. Use the J 44971 to press out the front control arm bushing.
Installation Procedure
1. Use the J 44971 to press in the front control arm bushing.
2. Install he lower control arm.
3. Install the front tire and wheel assembly.
4. Lower the vehicle.
