saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Trailing Arm|Service and Repair > < Suspension Strut / Shock Absorber|Front|Page 9251
Page 1
background image

Trailing Arm: Technical Service Bulletins
Suspension - Rear Suspension Bolt Torque Changes

SMU - Rear Suspension Bolt Torque Specification Changes 
# 05-03-09-002 - (Mar 10, 2005)

Models:
2005 Saturn VUE vehicles

Purpose

The purpose of this bulletin is to inform Saturn retailers of changes to several bolt torque specifications for the 2005 VUE rear suspension.

Rear Upper Control Arm-to-Support Assembly Bolt Torque Specification

The "Rear Axle Upper Control Arm Replacement" procedure in the Rear Suspension subsection of the Suspension section of the 2005 Saturn VUE
Service Manual, Vol. 1 has an updated torque specification for the upper control arm-to-support assembly bolt. The correct specification is 160 Nm (118
lb-ft).

Please go to Step 5 of the "Rear Axle Upper Control Arm Replacement" procedure (page 3-67 in the printed Manual) and cross out 110 N.m( 81 lb-ft).
Write in the new specification of 160 N.m (118 lb-ft).

Toe Link-to-Support Assembly Bolt Torque Specification

The "Toe Link Replacement" procedure in the Rear Suspension subsection of the Suspension section of the 2005 Saturn VUE Service Manual, Vol. 1
has an updated torque specification for the toe link-to-support assembly bolt.

The correct specification is 160 N.m, (118 lb-ft).

Please go to Step 4 of the "Toe Link Replacement" procedure (page 3-91 in the printed Manual) and cross out 95 N.m (70 lb-ft). Write in the new
specification of 160 Nm (118 lb-ft).

Rear Suspension Fastener Tightening Specifications Table

The Rear Suspension Fastener Tightening Specifications table (page 3-53 in the printed Manual must also be updated as follows:

^

Locate the line for "Upper Control Arm-to-Support Assembly Bolts" and cross out 110 N.m (81 lb-ft). Write in the new specification of 160 N.m
(118 lb-ft).

^

Locate the line for "Toe Link-to-Support Bolts" and cross out 95 N.m (70 lb-ft). Write in the new specification of 160 N.m (118 lb-ft).

The SI website has been Updated and future Service Stall System SI CD releases will include this and other Service Manual Updates.

Disclaimer

Trailing Arm|Service and Repair > < Suspension Strut / Shock Absorber|Front|Page 9251