VUE AWD L4-2.2L VIN D (2005)
Shift Interlock Solenoid: Service and Repair
Automatic Transmission Shift Lock Actuator Replacement
Removal Procedure
1. Disable the SIR system. Refer to Restraint Systems Disabling and Enabling Zone 3 and Restraint Systems Disabling and Enabling Zone 5.
2. Remove the instrument panel (I/P) storage compartment.
3. Disconnect the brake transaxle shift interlock (BTSI) solenoid harness connector.
4. Using a screwdriver, disconnect the plastic retainers at solenoid base and at the park brake lever.
5. Remove the solenoid from the shifter assembly.
Installation Procedure
1. Install the solenoid onto the shifter assembly. Connect the plastic retainers at the solenoid base and at the park brake lever.
2. Connect the BTSI solenoid harness connector.
3. Verify proper operation.
4. Remove the I/P storage compartment.
5. Enable the SIR system. Refer to Restraint Systems Disabling and Enabling Zone 3 and Restraint Systems Disabling and Enabling Zone 5.