VUE AWD L4-2.2L VIN D (2005)
1. Install the TCM bracket (5) if previously removed.
2. Notice: Install the TCM bracket nuts (3).
Tighten the nuts to 10 Nm (89 inch lbs.).
3. Install the TCM electrical connector (1) to the TCM.
4. Install the TCM (2) to the TCM bracket (5).
5. Re-tape the extra length of wires in harness.
6. Install the I/P lower left closeout panel.
7. Install the I/P lower closeout panel screws.
^
Tighten the screws to 2 Nm (18 inch lbs.).