VUE AWD L4-2.2L VIN D (2005)
1. Install the "E" clip retainers to the quick connect fittings.
2. Install the dust covers to the quick connect fittings.
3. Install the TOC lines to the transmission. Gently tug on the TOC lines to ensure proper engagement of the quick connect fitting.
4. Notice: Refer to Fastener Notice in Service Precautions.
Install the TOC line bracket bolt to the transmission.
^
Tighten the bolt to 7 Nm (62 inch lbs.).
5. Install the lower TOC line to the radiator.
^
Tighten fitting to 16 Nm (12 ft. lbs.).
6. Connect the upper TOC line to the clip on the fan shroud.
7. Lower the vehicle.
8. Install the upper TOC line to the radiator.
^
Tighten fitting to 16 Nm (12 ft. lbs.).
9. Add fluid to the transmission as necessary.
10. Start the engine and inspect for leaks.
